When you need welding or fabrication done, you want to be sure all the work done is high-quality. If you’re going to be happy with the final product, you want to use the right shop. Here are some steps you can follow to select the right welding shop for your needs.

Look for Certifications

Assess certifications and qualifications: Look for a welding shop that employs certified welders. Certifications such as those from the American Welding Society (AWS) indicate that the welders have met certain standards of knowledge and skill. Additionally, inquire about the shop’s experience, training programs, and any industry affiliations.

Visit the Shop

Once you have shortlisted a few welding shops, visit them in person. Observe their facilities, equipment, and the overall cleanliness and organization of the shop. A well-maintained and properly equipped shop is an indication of professionalism and commitment to quality.

Inquire About Previous Projects Similar to Yours 

Ask the welding shop about their previous projects and if they have experience working on projects similar to yours. Request to see samples of their work or photographs of completed projects. This will give you an idea of their capabilities and the quality of their craftsmanship.

Trust Your Instincts

Finally, trust your gut feeling. If you have a positive impression of a particular welding shop, it is likely a good choice. Consider all the factors mentioned above, weigh the pros and cons, and make an informed decision.

Need a Welding Shop Near Bellingham? 

Now that you know more about welding or fabrication, consider Aerotech. We have a wealth of experience with a variety of fabrication projects, and you’ll receive expert advice and quality results. Contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with fabrication, metalization, blasting and coating.

Expert Welding Shop Serving Bellingham

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater & Lacey

Posted on May 30, 2023 | Published by Ignite Local | Related Local Business

When you need manufacturing for a project, you want the very best work you can get. Whether it is for your business or a personal project, getting a solid final product is essential. Knowing some advantages of using a professional fabrication shop can help you make the right choice. 

Faster Service

When you use a professional shop, you can have a much quicker turnaround time. While it may be slightly cheaper to work with a friend who knows how to weld, the odds that you will get your project done on time are slim. A professional shop has schedules and staff to get things done. 

Higher-Quality Work

No matter what the purpose of your project is, you always want the best possible outcome. When you work with a professional shop, you will get top-notch quality. This ensures that the work will last a long time and that you will be thrilled with how everything looks in the end. 

Better Safety

One of the things that you just can’t get with anything but a professional fabrication shop is safety. Knowing that the people who are working on your project are adhering to strict safety standards is well worth the price of admission. With these high standards, you can rest assured that your project was completed by professionals without any incidents. 

Need a Fabrication Shop Near Tacoma?

Now that you know more about fabrication, consider Aerotech. We have a wealth of experience with a variety of fabrication projects, and you’ll receive expert advice and quality results. Contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with fabrication, metalization, blasting and coating.

Professional Fabrication Shop Near Tacoma

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater & Lacey

Posted on April 28, 2023 | Published by Ignite Local | Related Local Business

When you need fabrication for a project, it can be tempting to do it yourself. However, even if you know how to weld, it is important to enlist the services of a professional. Knowing some reasons to use professional welding services can help you make the right choice. 

Quality

When you hire a professional welder, you can be sure that the quality of the work will be up to your expectations. Doing the job yourself may not always turn out as well as you need for your project. A professional welder will have high-end equipment and training that will result in a better final product. 

Speed

While it may seem like doing a welding job yourself is a good idea, the odds are good that it will take a longer than you think. If you’re working on a deadline, it will almost always be a better idea to hire a professional. They can work much faster and with better results. 

Safety

Safety should be your number one priority when doing any kind of fabrication work. When you get the help of professional welding services, you can be sure that everyone will be safe and that all standards will be high. Plus, you don’t have to worry about any of the safety issues that could come up when doing your own welding and fabrication. 

Need Welding Services Near Olympia?

Now that you know more about welding, consider Aerotech. We have a wealth of experience with a variety of fabrication projects, and you’ll receive expert advice and quality results. Contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with fabrication, metalization, blasting and coating.

Professional Welding Services Near Olympia

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater & Lacey

Posted on March 28, 2023 | Published by Ignite Local | Related Local Business

When you need coating for a fabrication project, it is important to know what your options are. Powder coating is a great way to get the color and coating you need with the longevity you want. Knowing everything you can about the process can help you choose wisely. 

What it Is

Coating with powder involves applying a dry powder to a metal surface, which is then cured with heat. This type of coating is incredibly durable and very even. Because there is no paint involved, you don’t have to worry about inconsistencies or other finishing issues. 

What Types There Are

There are two types of coating using powder: thermosets and thermoplastics. Thermosets form bonds once they have been cured, so they are incredibly durable. Thermoplastics are also durable but they are more easily removed if you want to refinish a project after it has been coated.  

How it is Applied

Before the powder coating process begins, your project needs to be completely cleaned and degreased. Once the project is prepared and cleaned, it can then be sprayed with the powder. The project and coating are then cured for the right amount of time to make it as consistent-looking and durable as possible, even in high-heat situations where paint would melt or fade. 

Need Powder Coating Near Seattle?

Now that you know more about this coating option, consider Aerotech. We have a wealth of experience with a variety of fabrication projects, and you’ll receive expert advice and quality results. Contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with fabrication, metalization, blasting and welding.

High-Quality Powder Coating Near Seattle

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater & Lacey

Posted on February 28, 2023 | Published by Ignite Local | Related Local Business

When you need fabrication work done, finding the right shop is essential. There are a lot of shops out there that are capable of manufacturing but not all of them will be right for your specific project. Knowing some questions to ask at a fabrication shop will help you make the right decision. 

What is Your Capacity?

Before you hire a shop, you need to know if they’ll be able to meet your volume requirements. If you need a large number of items made for your project, be sure the shop can handle it. 

What Other Projects Have You Worked On?

Not all shops work on the same types of projects. Ask whether or not they’ve worked on things that are similar to what you need. If the answer is yes, ask to see an example so you can get a good look at what you can expect.  

Can You Meet My Deadline?

Deadlines are a big part of what makes your manufacturing project a success. Ask any fabrication shop that you’re thinking of working with if they’ll be able to meet your timeline requirements. If not, they will most likely not be the right option for you and you should think about looking elsewhere. 

Need a Fabrication Shop Near Marysville?

Now that you know more about choosing a shop for your fabrication needs, consider Aerotech. We have a wealth of experience with a variety of fabrication projects, and you’ll receive expert advice and quality results.  Contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with powder coating, metalization, blasting and welding.

Top-Tier Fabrication Shop Serving Marysville

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater & Lacey

Posted on January 30, 2023 | Published by Ignite Local | Related Local Business

When choosing a coating for your project, consider all the different angles. Knowing what your options are can help you make a good decision. We’ll discuss the benefits of choosing epoxy paint as the coating for your project. 

Covers Defects

One of the things that makes epoxy a great coating is how forgiving it can be. If your fabrication job has any defects, epoxy may be able to cover them. Because epoxy is non-porous, however, it can become extremely slippery when wet. This is especially dangerous if epoxy is applied in a location where small children or the elderly walk regularly.

Cost-Effective

Compared to other coatings, epoxy is incredibly cost-effective and inexpensive. This makes it a great choice if you are mass-producing items or if you are working on a budget. You can get a great look without having to spend a lot of your budget on the coating process. 

Longevity

Epoxy paint is relatively long-lasting compared to other paint types. If you want your coating to last longer, it could be a good option, even if it will be exposed to heat and sunlight. An epoxy coating can give you the longevity you need without having to spend a lot of money or worry about exposed defects. 

Need Epoxy Paint in Arlington?

Now that you know more about the qualities of epoxy paint for your fabrication needs, come to Aerotech. To receive expert advice and quality results, contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with powder coating, metalization, blasting and welding.

Epoxy Paint Experts in Arlington

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater, and Lacey

Posted on December 30, 2022 | Published by Ignite Local | Related Local Business

When you need metal fabrication for your business, you want to be certain that the final product will be top-notch. The best way to get high-quality fabrication is to find the best possible shop. Knowing the qualities of a good fabrication shop will help you make the right choice. 

Large Enough Workforce

When choosing a shop, you want to be sure that their workforce is large enough to handle your needs. If you’re going to get your parts or products on time, the shop needs to be able to make them as fast as you need them. Make sure that their workforce is large enough to produce things at the rate you need to get your project done.  

Up-to-Date Equipment

Any shop you work with should have up-to-date equipment that is in good condition and has been regularly maintained. If something goes wrong with the shop’s equipment, you could be looking at major delays. Be sure to ask about the equipment at the shop as well as what the maintenance schedule is like. 

Experience 

Perhaps the most important thing to look out for when choosing a fabrication shop is their experience. Find out if they have worked on projects like yours in the past and whether or not they have a portfolio they can show you. This will give you a good idea of what they do and how they work. 

Need a Fabrication Shop Near Marysville?

Now that you know more about the qualities of a good shop for your fabrication needs, come to Aerotech. To receive expert advice and quality results, contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with powder coating, metalization, blasting and welding.

High-Quality Fabrication Shop Near Marysville

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater, and Lacey

Posted on November 17, 2022 | Published by Ignite Local | Related Local Business

When you have metal components or materials to paint, choosing the right method is essential. Powder coating provides a range of advantages over conventional painting methods.  From its environmental impact to its longevity, we’ll review its benefits.

Longevity

Powder coating works because it uses a thermal bonding process that makes the powder adhere to the surface. Because of this, it’s incredibly easy to maintain and will last for many years. If you’re going to be using the materials for a long time and want them to keep their look, this is a great option for you. 

Durability

Polyester powder coating can withstand all kinds of use and abuse without fading or chipping. This makes it a perfect choice if you’re painting outdoor equipment or other materials that need to hold up to years of the elements. The coating will also protect the metal underneath from damage, which will, in turn, help it last longer. 

Eco-Friendly

Unlike traditional painting methods, powder coating is extremely eco-friendly. The powder doesn’t contain any volatile organic compounds, which are the main things that make painting an environmental issue. The powder is easy to clean up and won’t harm the environment around the painting site. 

Need Powder Coating Near Seattle?

Now that you know more about the many benefits associated with the painting and coating process, come to Aerotech. To receive expert advice and quality results, contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with metalization, blasting and welding.

Powder Coating Experts Serving Seattle

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater, and Lacey

Posted on October 29, 2022 | Published by Ignite Local | Related Local Business

Abrasive blasting is a very important part of surface coating preparation in Bellingham. It removes surface imperfections, like rust and paint. Abrasive material, like garnet, glass beads, steel grit or aluminum oxide, is used to strip away and clean a surface prior to painting and coating. While there are alternatives to blasting, it’s one of the most effective methods available. Following are several reasons why professionals and laymen prefer this method over others.

Most Economical

Abrasive blasting is one of the most economical ways to remove unwanted materials from a surface. Whether you need to remove paint, rust, fungus or calcium deposits, this method can quickly provide the results you want. In industries where time is money, this is especially important.

Most Effective

While there are other techniques that can be used, none of them is as effective as abrasive blasting. This method can even clean hard-to-reach areas, ensuring your surface is completely prepared for painting and coating.

Safer Than Other Methods

Price and effectiveness are important, but so is safety. This method is considered to be far safer than chemical cleaning methods. Specialists  take various protective measures that further limit the associated danger from the dust and sand particles created to protect both themselves and the environment.

Need Abrasive Blasting Services in Bellingham?

Do you need abrasive blast services in Bellingham? Now that you know more about the many benefits associated with the process, come to Aerotech. To receive expert advice and quality results, contact us at Aerotech Manufacturing in Arlington today. Our specialists also provide assistance with metalization.

Abrasive Blasting Specialists Serving Bellingham

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater, and Lacey

Posted on September 30, 2022 | Published by Ignite Local | Related Local Business

While you want the floors of your Oak Harbor workplace to look aesthetically great, they also need to be durable and functional. Some flooring choices are naturally slippery and can lead to dangerous accidents. This is when you need an effective non-skid floor coating that allows you to keep the look of your floors while also enhancing their slip resistance.

Basics 

Non-skid coating is most often used for safety purposes in industrial facilities. It works by providing existing flooring (often concrete) higher traction. This is especially important for areas that see high levels of traffic. The traction is achieved by using coatings that contain small particles. 

Benefits Associated with Non-Skid Floor Coating 

The main purpose of investing in a non-skid coating is to improve the traction of floors. The product works to increase the floor’s friction coefficient to avoid slips and falls. Some can enhance the durability of different floor types. This is because these coatings create an extra layer on surfaces that offer protection against erosion and general wear and tear.

Other Applications 

Non-skid traction coating can be applied to a wide variety of surfaces besides flooring. Some of the most common applications include: 

• Stairs 
• Handrails 
• Walkways 
• Grating 
• Road Plates 
• Ship Decks 
• Ladders 
• Perforated Metal 
• Drain & Vault Covers 
• Bridges 
• Gangways 
• Docks 

Need Non-Skid Floor Coating in Oak Harbor? 

If you’re ready to enjoy all the benefits of investing in a non-skid coating for your floors or other surfaces, discuss the specifics of your project with a professional. Aerotech Manufacturing in Arlington is here to help. Our experienced pros offer a wide variety of surface preparation services, including abrasive blasting and coating. As local industry leaders, we care about the success of businesses in the region. You can count on our highly-trained technicians for expert advice, quality workmanship and unbeatable customer care.  Contact us today!

Non-Skid Floor Coating Pros Serving Oak Harbor 

Serving the Puget Sound Area, including Seattle, Bellevue, Everett, Bellingham, Marysville, Arlington, Kent, Olympia, Tacoma, Mt. Vernon, Oak Harbor, Burien, Fife, Tumwater & Lacey

Posted on August 31, 2022 | Published by Ignite Local | Related Local Business